| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| Type Glue for Purfling and Bindings http://www-.luthiersforum.com/forum/viewtopic.php?f=10102&t=7666 |
Page 1 of 1 |
| Author: | Tom Armstrong [ Mon Jul 24, 2006 1:18 am ] |
| Post subject: | |
For those who glue up wood sandwiches for slicing into purfling and bindings, what glue is preferred. I ask the question because of concerns of heat blankets when bending. Thanks, Tom |
|
| Author: | D Stewart [ Mon Jul 24, 2006 2:24 am ] |
| Post subject: | |
The bit that I have done has been with traditional tightbond. Definately softens with heat not to mention moisture, so I tape pieces togeter and bend as sets. I still just have bulbs for heat, not a blanket yet. Donovan |
|
| Author: | Serge Poirier [ Mon Jul 24, 2006 3:09 am ] |
| Post subject: | |
Titebond here too, bent the purflings on the hot pipe and the bindings with bulbs and blanket. |
|
| Author: | Sam Price [ Mon Jul 24, 2006 5:33 am ] |
| Post subject: | |
edit |
|
| Author: | RussellR [ Mon Jul 24, 2006 5:45 am ] |
| Post subject: | |
I prefer a Waterproof PVA Glue, As I have known Titebond to delaminate. |
|
| Author: | Michael Dale Payne [ Tue Jul 25, 2006 3:19 am ] |
| Post subject: | |
I tape my purfling to the bindings bend them and install as seprate pieces because I find it easier to fit the miter at the end graft that way |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|